Select Page
Written by: OptimumG

## Springs & Dampers, Part One

When out on the track, you can spend an entire weekend tuning spring rates and shock settings, and shave a second from lap times. But, how do you know if you are even in the right ballpark, and maybe a completely different spring and shock setup could cut two seconds per lap, especially when working with an unfamiliar car?

read more

## The four secrets for chassis happiness

Claude Rouelle explores the possibilities of qualifying and quantifying a racecar design or set-up through grip, balance, control and stability. In the racing industry, I often find engineers that perform simulations in the same way barmen create cocktails: by (sometimes randomly) mixing ingredients and varying quantities until they eventually find something that matches their taste.

read more

## Getting more from your yaw diagrams

Our analysis of yaw versus lateral acceleration continues with Claude Rouelle’s explanation of the yaw moment diagram and how to interpret it. We will start this article
by reviewing some basic concepts. As we have seen in the previous articles on the yaw moment versus lateral acceleration method, an understeering car is defined as a
car that doesn’t have enough yaw moment and an oversteering car is a car with too much yaw moment.

read more

## Slide rules: analysing an oversteering car

What makes a car quick in steady state and in transient? Claude Rouelle develops his analysis of lateral acceleration and yaw moment variation. In April’s RE (V27N4), we saw that there are 12 causes for the yaw moment: four tyre lateral forces Fy, four tyre longitudinal forces Fx; and four tyre self-alignment moments Mz.

read more

## Getting to grips with your yaw moments

One important part of a racecar performance engineer’s job is lap time simulation. Simulating and comparing the effect of car design and set-up parameters on the lap
time is essential. With the many inputs and outputs that exist in such simulation, it is always worth having metrics other than the lap time to know if and why we improve the car’s performance.

read more

## Intelligent Testing to Advance Vehicle Performance

In February 2010 OptimumG in collaboration with Oreste Berta S.A. performed a comprehensive vehicle dynamics test in Argentina. The primary goals of this test were to characterize vehicle performance and demonstrate what is possible with advanced data acquisition.

read more

## Vehicle data acquisition using CAN

Data acquisition is one of the best tools to increase the understanding of vehicle behavior. One can get tons of information just from a couple of potentiometers and accelerometers connected to a simple data logger. However as one adds more and more sensors a number of problems arise. First, the number of cables and connectors increase to where it becomes both a logistical and economical issue.

read more

## Suspension kinematics and its effect on performance

To make a car go faster around a track, there are a couple of things we can do that generally will improve lap times. We can, lower weight, increase engine power, increase downforce, reduce drag, increase tire grip....

read more

## Throttle maps and tire wear

In our recent article on the need of power in Formula SAE, we briefly looked at the throttle response of a specific engine. Mapping throttle pedal position to engine torque is a powerful tool for many vehicle dynamics...

read more

## It is all about horsepower… or is it?

A vehicle’s performance can be described using many different metrics. The most commonly used is probably engine power. Whether your unit of choice is horsepower, kilowatts or calories per hour, the peak power of an...

read more